Prev I Next
(15 of 17) ClayPaws® Accessories

Prev I Next
(6 of 7) ClayPaws® Kits

ClayPaws® prints are so precious. Wouldn't it be wonderful if you could make additional copies of the prints you already have? You can!!

Included in this kit is everything you need to make copies of your existing prints! You will receive two ClayPaws® kits (white, terra cotta, or soft - your choice), one package of MoldMaker™, one bottle of Finishing Glaze, and one patty pad/circle mold. (Components are all available individually. Order the kit for a savings of $2.00!)

MoldMaker™ is a safe, easy way to make a mold of your pet's ClayPaws® print. All the directions you need are on the box to make the mold of your print. One 8 oz. box will    make at least two molds. Use your mold to make your additional prints.

Tip: The mold you make will be the reverse of your original print. Before baking your mold, you may want to trim off the excess so your mold is easier to center on the clay patty.

Tip: Your mold will pick up the color of the clay you use it in. (Terra cotta especially!) Be sure your mold is clean before placing it on a new ClayPaws® patty to make your new
print!)

If you are unsure which type of clay your original print is made with, check with the business who made it for you. If this is not possible, here are other clues:

• If your print was given to you in its original plastic bag, there will be a sticker on the back that says Soft ClayPaws® if the clay is our softer formula. If there is no sticker, it is most likely our original white clay.
• Prints made from our original white clay weigh about 4 oz., while prints made from the Soft compound weigh about 2 oz.
  

---

---

---

---